Unable to do background input with 8bitdo gbros adapter
Posted: Mon Jan 21, 2019 12:25 pm
so I have a lot of stuff I have checked and made sure and the setup is pretty specific on what's not working. So I have an iBuffalo that works fine for background inputs, use a tracker and don't have to click back into the emulator. I just recently got an 8BitDo gbros adapter to use my SNES mini controller with snes9x 1.53 or 1.55. So here's where the weird happens, I can't do background inputs when I click off the emulator. Everything works fine while in, no issues shows inputs fine... Click off, not working. Checked settings again.. remapped, nothing while the emulator isn't the primary window. I'm at a loss... I checked the .conf file, everything looks solid from what I can tell. Now, I had this issue with an XBone controller, and the solution was a driver that was native in Windows that came already in the OS. Loaded that driver in it fixed it. I updated the 8BitDo adapter to current firmware/driver 1.22 (I believe is the correct number) and same issue.
ATM 1.55 is on the joypad#2 input because I attempted to see if 1 was just goofed and 2 may work, the same issue persisted.
1.55 .conf file - https://drive.google.com/file/d/13G_D-I ... sp=sharing
1.53 .conf file - https://drive.google.com/file/d/1D9KQiM ... sp=sharing
ATM 1.55 is on the joypad#2 input because I attempted to see if 1 was just goofed and 2 may work, the same issue persisted.
1.55 .conf file - https://drive.google.com/file/d/13G_D-I ... sp=sharing
1.53 .conf file - https://drive.google.com/file/d/1D9KQiM ... sp=sharing